Cyclosporine and Berberine: Can You Take Them Together?

High: Consult Your DoctorConflict
Learn about each ingredient:CyclosporineBerberine

Quick answer

Berberine appears to slow the breakdown of cyclosporine, most likely by blocking the CYP3A4 enzyme in the liver and gut, so cyclosporine blood levels rise. In a randomized trial of 104 kidney transplant recipients in China, those given berberine for 3 months ended with cyclosporine trough levels 29.3 percent higher than those not given it, and in a 6-patient substudy berberine raised cyclosporine exposure (AUC) by 34.5 percent. Results in 12 healthy men were mixed, and neither the Neoral nor the Sandimmune label mentions berberine.

Do not start berberine, or herbs that contain it such as goldenseal, barberry, Oregon grape or goldthread (coptis), while on cyclosporine without asking your doctor or pharmacist first. If you already take berberine, do not stop it on your own; tell your prescriber, since your cyclosporine level may change and need checking.

What happens?

Cyclosporine has a narrow safe range. Berberine slows its breakdown, so the same dose produces higher blood levels.

1

Enzyme blocked

The trial authors concluded berberine most likely blocks CYP3A4, the main enzyme that breaks down cyclosporine.

2

Levels rise

In 6 transplant patients, berberine raised cyclosporine exposure by 34.5 percent and cut clearance by 40.4 percent.

3

Sustained effect

Over 3 months, trough levels ended 29.3 percent higher than in patients not given berberine.

In kidney transplant recipients, berberine raised cyclosporine exposure by <strong>34.5 percent</strong>, and trough levels ended <strong>29.3 percent</strong> higher after 3 months.

Why is this important?

An unplanned rise of this size can push cyclosporine above the target range, where the risk of kidney damage grows.

Narrow range

A rise of about a third without a dose change is meaningful for a drug dosed by blood level.

Kidney toxicity

The cyclosporine labels warn that high levels raise the risk of kidney damage and other toxicity.

Stopping matters

If your dose was adjusted around berberine, stopping it could let your level fall and raise the risk of rejection.

Stopping berberine after a dose adjustment can have the opposite effect and raise the risk of rejection.

What should you do?

The practical fix is simple: separate the doses.

Do not add or remove berberine on your own while on cyclosporine

Best practical schedule

Before starting
Check blood sugar, cholesterol and weight blends for berberine, goldenseal, barberry, Oregon grape or coptis, and ask your doctor or pharmacist.
Every day
Take cyclosporine as prescribed, keep your level and kidney tests, and keep your supplement list current.
After a change
If you have been taking berberine, tell your prescriber instead of stopping on your own.

Important reminders

  • •Spacing berberine and cyclosporine apart was not studied and is unlikely to help.
  • •Goldenseal and other berberine herbs were not tested but deserve the same caution.

The trial authors suggested berberine might allow a lower cyclosporine dose, but that would be a planned decision with frequent level checks, not something to try on your own.

Which specific products are affected?

Many common Berberine products can affect this interaction.

Cyclosporine products this applies to

Neoral (cyclosporine, modified) capsules and oral solutionSandimmune (cyclosporine) capsulesGengraf (cyclosporine, modified)Generic cyclosporine capsules and oral solution

Where berberine shows up

Berberine HCl and dihydroberberine capsules and powdersGoldensealBarberry and Oregon grapeGoldthread (coptis, huang lian)Blood sugar, metabolic and cholesterol blends

Other sources

  • •Cyclosporine eye drops (such as Restasis) are applied to the eye rather than swallowed and were not part of these sources; mention them to your clinician anyway.

Berberine is often one ingredient among many in metabolic blends, so read the full Supplement Facts panel.

The bottom line

Berberine raised cyclosporine blood levels in kidney transplant recipients, most likely by blocking the CYP3A4 enzyme; trough levels ended 29.3 percent higher after 3 months in a randomized trial. The cyclosporine labels do not mention berberine, and the evidence comes from one research group. Do not start or stop berberine or berberine-containing herbs without your prescriber.

If you already take berberine, tell your prescriber rather than stopping it on your own, since your level may change.

What happens when you take cyclosporine with berberine?

Cyclosporine (Neoral, Sandimmune, Gengraf) is an immunosuppressant used to prevent rejection after kidney, liver and heart transplants, and Neoral is also used for severe rheumatoid arthritis and psoriasis. It has a narrow safe range, and transplant patients are dosed by blood level. Berberine is a plant compound sold for blood sugar, cholesterol and weight. In kidney transplant recipients, adding berberine raised cyclosporine blood levels.

  1. Cyclosporine is broken down mainly by the CYP3A4 enzyme and is pumped by the P-glycoprotein transporter, according to its label.
  2. The trial authors concluded that berberine most likely blocks CYP3A4 in the liver, the small intestine or both. The authors of a related healthy-volunteer study also suggested that slower stomach and gut emptying could play a part.
  3. With less cyclosporine broken down, more stays in the blood. In 6 transplant patients, berberine raised cyclosporine exposure by 34.5 percent and the lowest level of the day by 88.3 percent, and cut clearance by 40.4 percent.
  4. Over 3 months in 52 patients, trough levels ended 29.3 percent higher than in 52 patients not given berberine.

Why is this important?

A rise of around a third in cyclosporine exposure, without a dose change, is clinically meaningful for a drug with a narrow range. The cyclosporine labels warn that high levels raise the risk of kidney damage and other toxicity, which is why transplant teams adjust doses by blood level.

The trial authors saw this as a possible way to lower the cyclosporine dose. That would be a planned decision with frequent level checks. Adding berberine on your own is different: your team would not know why your level changed.

Stopping matters too. If your dose has been adjusted while you take berberine, stopping it could let your level fall, which raises the risk of rejection.

What should you do?

The safe principle: do not add or remove berberine on your own while taking cyclosporine.

Before starting: Read labels on blood sugar, cholesterol and weight support blends for berberine, berberine HCl, dihydroberberine, goldenseal, barberry, Oregon grape or coptis. Ask your doctor or pharmacist first.

Every day while on cyclosporine: Take cyclosporine exactly as prescribed and keep your blood-level and kidney tests. Keep your team's list of supplements up to date.

After a change: If you realize you have been taking berberine, tell your prescriber rather than stopping on your own, so they can check your level as it changes.

Which specific products are affected?

On the medication side, this applies to oral cyclosporine: Neoral, Sandimmune, Gengraf and generic cyclosporine capsules and oral solution. Cyclosporine eye drops (such as Restasis) are applied to the eye rather than swallowed and were not part of these sources; mention them to your clinician anyway.

On the supplement side, it covers berberine capsules and powders (berberine HCl, dihydroberberine) and herbs that contain berberine, such as goldenseal, barberry, Oregon grape and goldthread (coptis, huang lian). Berberine is a common ingredient in blood sugar, metabolic and cholesterol blends.

The science behind it

A randomized controlled trial (Wu X, et al. Eur J Clin Pharmacol. 2005) gave cyclosporine with or without berberine to 104 kidney transplant recipients in China for 3 months. Trough levels rose in both groups over time, but ended 29.3 percent higher (and concentration per dose 27.8 percent higher) with berberine. No significant effects on liver or kidney function were seen. In a 12-day substudy of 6 patients, AUC rose 34.5 percent and apparent clearance fell 40.4 percent.

A study in 12 healthy men (Xin HW, et al. Methods Find Exp Clin Pharmacol. 2006) found mixed results: berberine did not change cyclosporine levels at the higher cyclosporine dose tested, but raised AUC by 19.2 percent at the lower dose. A review of cyclosporine and herbal interactions (Colombo D, et al. J Toxicol. 2014) lists berberine among herbs reported to increase cyclosporine levels in patients.

What has not been shown: these studies did not report on rejection, the two human studies came from one research group in China, and the Neoral and Sandimmune labels do not mention berberine. Goldenseal and other berberine herbs have not been tested with cyclosporine in these studies.

Frequently Asked Questions

Can I take berberine for blood sugar while on cyclosporine?

Ask your prescriber first. Berberine raised cyclosporine levels in transplant patients, and your team would need to know so they can check your level.

How big is the effect?

In transplant patients, cyclosporine exposure rose by about a third, and trough levels ended about 29 percent higher after 3 months. Results in healthy volunteers were smaller and mixed.

Does goldenseal do the same thing?

Goldenseal contains berberine, but it was not tested with cyclosporine in these studies. Treat it with the same caution.

Can I space berberine and cyclosporine apart?

Spacing was not studied. Because the effect is on the enzyme that breaks cyclosporine down, spacing is unlikely to prevent it.

What if I have already been taking berberine?

Tell your prescriber. Do not stop it on your own, because your level could fall when you stop.

Key takeaways

  • Berberine raised cyclosporine levels in kidney transplant recipients, most likely by blocking CYP3A4.
  • Trough levels ended 29.3 percent higher after 3 months in a randomized trial of 104 patients.
  • The cyclosporine labels do not mention berberine, so this rests on one research group's studies.
  • Berberine is found in goldenseal, barberry, Oregon grape and coptis, and in many blood sugar blends.
  • Do not start or stop berberine on your own; your prescriber may need to check your level.

References

Primary evidence for this article. Always consult your healthcare provider for personal medical advice.

Related Interactions

Other interactions you should know about

Grapefruit + Sirolimus

high

Sirolimus is a CYP3A4 and P-glycoprotein substrate with a narrow therapeutic window and high patient-to-patient variability. The FDA-approved Rapamune label states that grapefruit juice inhibits the CYP3A4-mediated metabolism of sirolimus and must not be taken with, or used to dilute, the drug, because unpredictable rises in blood levels can cause toxicity and threaten the transplanted organ.

Tacrolimus + St. John's Wort

critical

St. John's wort induces the CYP3A4 enzyme and the P-glycoprotein transporter, which speeds up clearance of tacrolimus and lowers its blood levels, raising the risk of transplant rejection. Stopping the herb lets tacrolimus levels climb back up, which can push them too high if the dose was raised in the meantime; high tacrolimus levels can harm the kidneys.

Atorvastatin + Berberine

low

Berberine mildly slows the CYP3A4 enzyme in people: in healthy men, two weeks of 300 mg three times a day raised levels of the test drug midazolam by about 40 percent. Atorvastatin is partly cleared by CYP3A4 but is much less sensitive to CYP3A4 blocking than simvastatin, and no human study has measured atorvastatin levels with berberine. In trials that combined berberine with simvastatin, muscle aches and liver enzyme rises were not more common.

Seville Orange + Red Yeast Rice

high

Seville orange contains furanocoumarins that inhibit intestinal CYP3A4, the enzyme that clears the monacolin K in red yeast rice. Because monacolin K is chemically identical to the statin lovastatin and depends on CYP3A4 for its first-pass breakdown, blocking that enzyme raises systemic exposure to the active statin, increasing the risk of muscle-related side effects such as myopathy and, rarely, rhabdomyolysis.

St. John's Wort + Red Yeast Rice

moderate

St. John's wort is a strong inducer of the CYP3A4 enzyme system that clears the statin-like compound (monacolin K, chemically identical to lovastatin) in red yeast rice. Taking them together speeds up how the body breaks down that compound, lowering its levels and weakening red yeast rice's cholesterol-lowering effect. The concern here is loss of benefit rather than toxicity, and the direction is the opposite of CYP3A4-inhibitor interactions, so it does not raise muscle-injury risk.

Pomelo + Red Yeast Rice

high

Pomelo, like grapefruit, contains furanocoumarins that inhibit the intestinal CYP3A4 enzyme. Red yeast rice's active constituent, monacolin K, is chemically identical to the statin lovastatin, which depends on CYP3A4 for its breakdown. When pomelo blocks that enzyme, more of the monacolin K reaches the bloodstream, amplifying the dose-dependent statin-type risks of muscle injury and, rarely, liver enzyme elevation. Because furanocoumarin inhibition can persist for days, the effect is not reliably avoided by taking the two at different times of day.

Disclaimer: This article is for informational purposes only and is not a substitute for professional medical advice. Always consult your healthcare provider before making changes to your supplement or medication routine. Pilora does not diagnose, treat, cure, or prevent any disease.

Check all your supplement interactions instantly

Try Pilora Free